유압장치를 처음 사용하시나요? Here are the details of the hydraulic intensifier.
유압 증압기의 세부 사항
SLIDING CYLINDER OR RAM: It slides between the fixed cylinder and fixed ram of hydraulic intensifier. 움직이는 부분은 램 하나만 있습니다. It slides thanks to hydraulics intensifier force. Liquid is supplied via fixed ram to sliding cylinder.
Hydraulics intensifier fixed RAM is the smallest and interior part. 슬라이딩 실린더가 이를 둘러싸고 있습니다. 이 고정 램은 고압 액체를 받습니다.
유압 증압기에도 4개의 밸브가 있습니다. Let’s call them A, B, C, and D. These allow low-pressure liquid to flow into the device from the supply. From valve ‘D’, liquid enters the fixed cylinder, then passes through valve ‘A’ and into the sliding cylinder. It allows liquid to flow from the fixed cylinder to be discharged for exhaustion through a valve. Valve B supplies high pressure liquid to intensifiers attached to hydraulics machines.
유압 강화 장치 작동 중
Hydraulics intensifiers increase the intensity of fluid pressure. 강화 장치는 유체를 이동시켜 작동합니다. Flows from low pressure to high pressure at the outlet or machine.
슬라이딩 실린더가 정지 상태에서 시작됩니다. Low pressure liquid enters the fixed cylinder via valve ‘D’ and fills it properly. Close valves C, B, and D. Only valve A allows low pressure liquid into ram or sliding cylinder. As soon as valve ‘C’ opens, low pressure liquid flows from fixed cylinder to exhaust. Due to the supply from valve ‘A’, the sliding cylinder moves upward once the low pressure is out of the fixed cylinder. Low pressure liquid is pumped into the sliding cylinder once it reaches the top position. After the sliding cylinder is filled with low pressure liquid, both ‘A’ and ‘C’ close. As a result, the ‘B’ and ‘D’ valves open, and liquid with low pressure enters the fixed cylinder, pushing the sliding cylinder downward.
유압 시스템용 강화 장치
유압 증압기의 사용은 하중을 들어 올리기 위해 높은 압력이 필요한 유압 램, 유압 크레인, 유압 프레스, 유압 리프트 등에서 흔히 사용됩니다.
유압 강화기의 장점
펌프를 사용하면 작업이 더 쉬워집니다. therefore, it may be attached between the pump and hydraulics machinery.
유압 강화 장치의 단점
유지 관리 비용이 많이 듭니다.
유압 강화 장치: 그만한 가치가 있나요?
An hydraulic intensifier delivers high pressure from a low-pressure hydraulics source. The hydraulic intensifier converts fluid energies into higher output pressure with less energy. 이 조치는 열역학 법칙을 변경하지 않습니다.
Hydraulic intensifier is also known as hydraulic booster. Their operation is powered by a pump powered by low-pressure hydraulic power. Pump operation is set at a certain pressure, from which pressure is generated by the intensifier. 유압 파워 팩은 일반적으로 이를 사용합니다.
증압기는 시스템 설계를 단순화합니까?
시스템 입구 압력이 낮습니다. The differential piston design is guided by the powered pump. 복잡한 것 같습니다. Hydraulics intensifiers are loaded into self-contained cylinders that can be installed on existing or new mobile excavators. 컴팩트 실린더는 인라인 사용을 위해 설계되었습니다. 결과적으로 설치 기술이 최소화됩니다. This design is logically expanded, so standard pipe clamps and fittings should be available during installation.
강화 장치를 통한 유체력 강화
이러한 압력 증폭 부품은 애플리케이션이 인라인 모델을 허용하지 않는 경우 CETOP(유럽 유체 전송 위원회) 호환 모델 및 플랜지 온 변형과 같은 다른 형태로도 제공됩니다. To simplify the system by dividing it into compartments and creating a self-contained expanded pressure architecture. Excavators and mini diggers with less fluid actuation and complex valves commonly have intensifiers installed. HPU(유압 동력 장치) 또는 유능한 유체 동력 팩과 병렬로 작동하므로 네트워크 전체에서는 낮은 압력을 보장하고 필요한 경우에는 높은 압력을 보장합니다.
Hydraulics intensifiers boost circuit pressure where required, but not throughout the entire system. 결과적으로 시스템에 대한 스트레스가 줄어듭니다. These are installed as a single force developing package and improve the design and performance of systems.